Automated LP Heating Control Unit Tester
About: This system was designed for Schneider Electric and programmed and performed functional tests on the LP model heater control units at a rate of about one every 15 seconds. The units were transported through a conveyor belt system which routed passed or failed units.
Features:
Used a bed-of-nails fixtures to directly make contact with the PCB
Power tests are conducted before the module is programmed via JTAG with test firmware
Internal tests are then done by passing instructions and receiving results over a serial communications port
Finally the production software is programmed
Result: "Yelo provided us with a reliable Automated LP Tester. It's now in production and achieving a throughput of 1,400 units per day. We look forward to working with Yelo again and we would recommend them for similar projects."
- Paul Pady (Schneider Electric)
Features:
Used a bed-of-nails fixtures to directly make contact with the PCB
Power tests are conducted before the module is programmed via JTAG with test firmware
Internal tests are then done by passing instructions and receiving results over a serial communications port
Finally the production software is programmed
Result: "Yelo provided us with a reliable Automated LP Tester. It's now in production and achieving a throughput of 1,400 units per day. We look forward to working with Yelo again and we would recommend them for similar projects."
- Paul Pady (Schneider Electric)
Have you got a product that needs tested?
Yelo can design and build a custom test and measurement solution to meet your exact specifications and ensure it accurately performs the intended test function.
